Reiner jetStamp 790 Operations Instructions download pdf (Page 16)

Setting pre-texts

There are 12 different standard pre-texts stored in the stamp for each

language. The set pre-text (or blanks if pre-text is switched off)

is printed with all standard imprints which include a pre-text.

The following standard pre-texts are stored :

RECVD INU. DRAFT FAX

SENT ORDER PAID ORIG

FILE ENT.D RECPT REG.D

_ _ _ _ _ ( = pre-text switched off)

To select a pre-text proceed as follows:

Press [ MODE ] if necessary repeatedly, until

“NO / TXT” appears in the menu bar

Press [ NO / TXT ] to select this menu item

This menu may be protected by a password. In that case

the correct password must first be entered.

If you need more information, please contact your dealer.

Depending on the imprint selected, the display will now offer

entry of the numberer ( = INPUT - NUMBERER 1),

the repetition factor ( = INPUT - REPETITION)

or the pre-text ( = INPUT - PRE TEXT)

Press [ NEXT ] if necessary repeatedly, until the display

shows “INPUT - PRE TEXT”

Pressing the [ VARY ] button will cause the present pre-text

to be shown blinking

Press the [ NEXT ] button, if necessary repeatedly,

until the required pre-text appears

Press [ RETURN ] to accept this pre-text

Press [ RETURN ] again to exit the menu. The selected

imprint will be displayed again, and the stamp is ready for use

Note

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Reiner jetStamp 790 Operations Instructions Page 16